Datasheet

STM32F101xF, STM32F101xG Revision history
Doc ID 17143 Rev 2 107/108
8 Revision history
Table 66. Document revision history
Date Revision Changes
27-Oct-2009 1 Initial release.
15-Nov-2010 2
LQFP64 package mechanical data updated: see Figure 58: LQFP64 –
10 x 10 mm, 64 pin low-profile quad flat package outline and Table 63:
LQFP64 – 10 x 10 mm, 64 pin low-profile quad flat package mechanical
data.
Internal code removed from Table 65: STM32F101xF and
STM32F101xG ordering information scheme.
Updated note 2 below Table 51: I2C characteristics
Updated Figure 45: I2C bus AC waveforms and measurement circuit(1)
Updated Figure 44: Recommended NRST pin protection
Updated note 1 below Table 46: I/O static characteristics
Updated Table 20: Peripheral current consumption
Updated Table 14: Maximum current consumption in Run mode, code
with data processing running from Flash
Updated Table 15: Maximum current consumption in Run mode, code
with data processing running from RAM
Updated Table 16: Maximum current consumption in Sleep mode, code
running from Flash or RAM
Updated Table 17: Typical and maximum current consumptions in Stop
and Standby modes
Updated Table 18: Typical current consumption in Run mode, code with
data processing running from Flash
Updated Table 19: Typical current consumption in Sleep mode, code
running from Flash or RAM
Updated Table 24: LSE oscillator characteristics (fLSE = 32.768 kHz)
Updated Figure 21: Asynchronous non-multiplexed
SRAM/PSRAM/NOR read waveforms on page 58
Added Section 5.3.13: I/O current injection characteristics on page 79