Datasheet
Revision history STM32F101x8, STM32F101xB
88/90 DocID13586 Rev 16
21-Apr-2009 11
I/O information clarified on page 1. Figure 8: Memory map modified.
In Table 4: Medium-density STM32F101xx pin definitions: PB4, PB13,
PB14, PB15, PB3/TRACESWO moved from Default column to Remap
column.
Note modified in Table 12: Maximum current consumption in Run mode,
code with data processing running from Flash and Table 14: Maximum
current consumption in Sleep mode, code running from Flash or RAM.
Figure 16, Figure 17 and Figure 18 show typical curves.
Table 19: High-speed external user clock characteristics and Table 20:
Low-speed external user clock characteristics modified.
ACC
HSI
max values modified in Table 23: HSI oscillator characteristics.
Small text changes.
22-Sep-2009 12
Note 5 updated and Note 4 added in Table 4: Medium-density
STM32F101xx pin definitions.
V
RERINT
and T
Coeff
added to Table 11: Embedded internal reference
voltage. Typical I
DD_VBAT
value added in Table 15: Typical and maximum
current consumptions in Stop and Standby modes. Figure 15: Typical
current consumption on VBAT with RTC on versus temperature at
different VBAT values added.
f
HSE_ext
min modified in Table 19: High-speed external user clock
characteristics.
C
L1
and C
L2
replaced by C in Table 21: HSE 4-16 MHz oscillator
characteristics and Table 22: LSE oscillator characteristics (fLSE =
32.768 kHz), notes modified and moved below the tables.
Table 23: HSI oscillator characteristics modified. Conditions removed from
Table 25: Low-power mode wakeup timings.
Figure 28: Recommended NRST pin protection modified.
Note 1 modified below Figure 21: Typical application with an 8 MHz
crystal.
Figure 28: Recommended NRST pin protection modified.
IEC 1000 standard updated to IEC 61000 and SAE J1752/3 updated to
IEC 61967-2 in Section 5.3.10: EMC characteristics on page 51.
Jitter added to Table 26: PLL characteristics. C
ADC
and R
AIN
parameters
modified in Table 42: ADC characteristics. R
AIN
max values modified in
Table 43: RAIN max for fADC = 14 MHz.
Small text changes.
20-May-2010 13
Added STM32F101TB devices.
Added VFQFPN48 package.
Updated note 2 below Table 39: I2C characteristics
Updated Figure 29: I2C bus AC waveforms and measurement circuit(1)
Updated Figure 28: Recommended NRST pin protection
Updated Section 5.3.12: I/O current injection characteristics
Table 54. Document revision history (continued)
Date Revision Changes