Datasheet

Electrical characteristics STM32F100xC, STM32F100xD, STM32F100xE
44/98 Doc ID 15081 Rev 7
Table 17. Typical current consumption in Run mode, code with data processing
running from Flash
Symbol Parameter Conditions f
HCLK
Typical values
(1)
1. Typical values are measures at T
A
= 25 °C, V
DD
= 3.3 V.
Unit
All peripherals
enabled
(2)
2. Add an additional power consumption of 0.8 mA for the ADC and of 0.5 mA for the DAC analog part. In
applications, this consumption occurs only while the ADC is on (ADON bit is set in the ADC_CR2 register).
All peripherals
disabled
I
DD
Supply
current in
Run mode
Running on high-speed
external clock with an
8 MHz crystal
(3)
3. An 8 MHz crystal is used as the external clock source. The AHB prescaler is used to reduce the frequency
when f
HCLK
< 8 MHz, the PLL is used when f
HCLK
> 8 MHz.
24 MHz 14.1 9.5
mA
16 MHz 10 6.85
8 MHz 5.8 4.05
4 MHz 3.6 2.65
2 MHz 2.3 1.85
1 MHz 1.7 1.46
500 kHz 1.4 1.3
125 kHz 1.15 1.1
Running on high-speed
internal RC (HSI)
24 MHz 13.4 8.7
16 MHz 9.3 6.2
8 MHz 5.2 3.45
4 MHz 2.95 2.1
2 MHz 1.7 1.3
1 MHz 1.1 0.9
500 kHz 0.8 0.7
125 kHz 0.6 0.55