Datasheet

Electrical characteristics STM32F050xx
66/97 Doc ID 023683 Rev 1
R
PD
Weak pull-down
equivalent
resistor
(3)
V
IN
= V
DD
25 40 55 kΩ
C
IO
I/O pin
capacitance
-5-pF
1. Data based on design simulation only. Not tested in production.
2. Leakage could be higher than maximum value, if negative current is injected on adjacent pins.
3. Pull-up and pull-down resistors are designed with a true resistance in series with a switchable PMOS/NMOS. This
MOS/NMOS contribution
to the series resistance is minimum (~10% order).
Table 45. I/O static characteristics (continued)
Symbol Parameter Conditions Min Typ Max Unit