User manual

DocID025326 Rev 1 9/18
UM1677 Using IAR Embedded Workbench
®
for ARM
17
5 Using IAR Embedded Workbench
®
for ARM
5.1 Building an existing EWARM project
The following is the procedure for building an existing EWARM project.
1. Open the IAR Embedded Workbench
®
for ARM (EWARM).
Figure 3 shows the basic names of the windows referred to in this document.
Figure 3. IAR Embedded Workbench IDE (Integrated Design Environment)
2. In the File menu, select Open and click Workspace to display the Open Workspace
dialog box. Browse to select an example or demonstration or template workspace file
and click Open to launch it in the Project window.
3. In the Project menu, select Rebuild All to compile your project.
4. If your project is successfully compiled, the following window in Figure 4 is displayed.
Figure 4. EWARM project successfully compiled