User manual

Using IAR Embedded Workbench
®
for ARM UM1677
10/18 DocID025326 Rev 1
If you need to change your project settings (Include and preprocessor defines), you need
just to go through project options:
– For Include directories
Project>Options…>C/C++ compiler>
– For pre-processor defines
Project>Options…C/C++ compiler>pre-processor>
5. In the IAR Embedded Workbench IDE, from the Project menu, select Download and
Debug or, alternatively, click the Download and Debug button the in toolbar, to
program the Flash memory and begin debugging.
Figure 5. Download and Debug button
6. The debugger in the IAR Embedded Workbench can be used to debug source code at
C and assembly levels, set breakpoints, monitor individual variables and watch events
during the code execution.
Figure 6. IAR Embedded Workbench debugger screen