Datasheet

For further information contact your local STMicroelectronics sales office.

August 2013 DocID025096 Rev 1 1/3

32F0308DISCOVERY

Discovery kit for STM32F030 Value Line microcontrollers

Data brief

Features

• STM32F030R8T6 microcontroller featuring

64 KB of Flash memory, 8 KB of RAM in an

LQFP64 package

• On-board ST-LINK/V2 with selection mode

switch to use the kit as a standalone

ST-LINK/V2 (with SWD connector for

programming and debugging)

• Board power supply: through USB bus or from

an external 5 V supply voltage

• External application power supply: 3 V and 5 V

• Four LEDs:

– LD1 (red) for 3.3 V power on

– LD2 (red/green) for USB communication

– LD3 (green) for PC9 output

– LD4 (blue) for PC8 output

• Two push buttons (user and reset)

• Extension header for all LQFP64 I/Os for quick

connection to prototyping board and easy

probing

• An additional board is provided which can be

connected to the extension connector for even

easier prototyping and probing.

Description

The 32F0308DISCOVERY helps you to discover

the STM32 F0 Value Line Cortex™-M0 features

and to develop your applications easily. It includes

everything required for beginners and

experienced users to get started quickly.

Based on the STM32F030R8T6, an STM32 F0

series 32-bit ARM® Cortex™ microcontroller, it

includes an ST-LINK/V2 embedded debug tool,

LEDs, push buttons and a prototyping board for

easy connection of additional components and

modules.

A large number of free ready-to-run application

firmware examples are available on

www.st.com/stm32f0-discovery to support quick

evaluation and development.

www.st.com

PAGE 1
32F0308DISCOVERY Discovery kit for STM32F030 Value Line microcontrollers Data brief Features • STM32F030R8T6 microcontroller featuring 64 KB of Flash memory, 8 KB of RAM in an LQFP64 package • On-board ST-LINK/V2 with selection mode switch to use the kit as a standalone ST-LINK/V2 (with SWD connector for programming and debugging) • Board power supply: through USB bus or from an external 5 V supply voltage • External application power supply: 3 V and 5 V • Four LEDs: – LD1 (red) for 3.
PAGE 2
System requirements 1 2 3 32F0308DISCOVERY System requirements • Windows PC (XP, Vista, 7) • USB type A to Mini-B cable Development toolchains • Altium®, TASKING™ VX-Toolset • ARM®, Atollic TrueSTUDIO® • IAR™, EWARM (IAR Embedded Workbench®) • Keil™, MDK-ARM™ Demonstration software The demonstration software is preloaded in the board Flash memory. It uses the user button B1 to change the blinking frequency of the green LED LD3. Each click on the button is confirmed by the blue LED LD4.
PAGE 3
2F0308DISCOVERY Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale.