Datasheet

ManualsBrandsSTMICROELECTRONICS ManualsDev KitsPCB design board

March 2013 DocID023608 Rev 2 1/3

STM32373C-EVAL

Evaluation board for STM32F373xx microcontrollers

Data brief

Features

• STM32F373VCT6 microcontroller

• Four 5 V power supply options:

– Power jack

– ST-LINK/V2 USB connector

– User USB connector

– Daughter board

• Audio jack connected to I

S DAC

• Microphone connected to ADC through an

amplifier

• 2-GByte (or more) MicroSD card on SPI

• Three components on I

C bus: temperature

sensor, EEPROM and dual interface RF

EEPROM

• RS-232 communication configurable for

communication of Flash loader

• IrDA transceiver

• 240x320 TFT color LCD connected to SPI

interface

• Joystick with 4-direction control and selector

• Reset, Wakeup or Tamper, and Key buttons

• 4 color user LEDs

• 2 LEDs for MCU power range indicator

• ECG, pressure sensor and PT100 temperature

sensor connected to the 16-bit Sigma Delta

ADC of STM32F373VCT6

• Extension connectors for daughter board or

wrapping board

• MCU voltage: 3.3 V or adjustable 2.0 V - 3.6 V

• USB FS connector

• Touch slider

• RTC with backup battery

• CAN 2.0 A/B compliant connection

• Light dependent resistor (LDR)

• Two HDMI connectors with DDC and CEC

• IR transmitter and receiver

• Two ADC & DAC input and output signal

connectors and one Sigma Delta ADC input

signal connector

• Potentiometer

• JTAG/SWD and ETM trace debug support

• Embedded ST-LINK/V2

www.st.com

Summary of content (3 pages)

PAGE 1
STM32373C-EVAL Evaluation board for STM32F373xx microcontrollers Data brief • RS-232 communication configurable for communication of Flash loader • IrDA transceiver • 240x320 TFT color LCD connected to SPI interface • Joystick with 4-direction control and selector • Reset, Wakeup or Tamper, and Key buttons • 4 color user LEDs • 2 LEDs for MCU power range indicator • ECG, pressure sensor and PT100 temperature sensor connected to the 16-bit Sigma Delta ADC of STM32F373VCT6 • Extension connectors for daughter
PAGE 2
Description STM32373C-EVAL Description The STM32373C-EVAL evaluation board is designed as a complete demonstration and development platform for STMicroelectronics ARM Cortex-M4 core-based STM32F373VCT6 microcontroller. It features two I2Cs, three SPIs, three USARTs, one CAN, one CEC controller, one 12-bit ADC, three 16-bit sigma delta ADCs, three 12-bit DACs, internal 32-KByte SRAM and 256-KByte Flash, touch sensing slider, USB FS, and JTAG debugging support.
PAGE 3
STM32373C-EVAL Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale.