Datasheet

Data brief
For further information contact your local STMicroelectronics sales office.
March 2011 Doc ID 018496 Rev 1 1/3
3
STM32100E-EVAL
STM32100E-EVAL evaluation board
Features
■ Three 5V power supply options:
–Power jack
– ST-LINK/V2 connector
– Daughterboard
■ Boot from user Flash, system memory or
SRAM
■ 1 Gbyte (or more) MicroSD card
■ 16 Mbytes of serial Flash memory
■ 2 Mbytes of SRAM
■ 64 Kbits of EEPROM
■ Embedded ST-LINK/V2 debugger and
programmer
■ I
2
C/SMBus compatible serial interface
temperature sensor
■ 2-channel RS-232 communication interface
with RTS/CTS handshake support on one
channel
■ 1-channel RS-485 communication interface
sharing the USART1 connector
■ Extension connector for daughterboard or
wrapping board
■ IrDA transceiver
■ IR receiver
■ Inductor motor control connector
■ HDMI with CEC connection
■ JTAG and SWD debug support
■ 3.2" TFT color LCD with touch screen
■ Joystick with 4-direction control and selector
■ Reset, wakeup, tamper and user buttons
■ 4 LEDs
■ Speaker
■ RTC with backup battery
■ HDMI with CEC connection
Description
The STM32100E-EVAL evaluation board is
designed as a complete development platform for
the STMicroelectronics ARM
®
Cortex-M3 core-
based STM32F100 microcontroller.
A full range of hardware features helps you
evaluate all peripherals (HDMI CEC, SRAM,
motor control, LCD, MicroSD card, Serial Flash,
EEPROM, temperature sensor, speaker, IrDA,
RS-232 and RS-485 interfaces) and develop your
own applications.
Extension headers facilitate the connection of a
daughterboard or wrapping board for your specific
application.
The in-circuit ST-LINK/V2 tool can be easily used
for JTAG and SWD interface debugging and
programming.
www.st.com