Datasheet

Electrical characteristics STLVD111
6/19
3 Electrical characteristics
Note: 1 All currents into device pins are positive; all currents out of device pins are negative. All
voltages are referenced to device ground unless otherwise specified.
2 All typical values are given for V
CC
= 2.5V and T
A
= 25°C unless otherwise stated
Note: 1 All currents into device pins are positive; all currents out of device pins are negative. All
voltages are referenced to device ground unless otherwise specified.
2 All typical values are given for V
CC
= 2.5V and T
A
= 25°C unless otherwise stated
Table 5. Driver electrical characteristics (T
A
= -40 to 85 °C, V
CC
= 2.5V ± 5%, unless otherwise
specified Note: 1, 2)
Symbol Parameter Test condition Min. Typ. Max. Unit
V
OD
Output differential voltage (Figure 4.)R
L
= 100 Ω 400 500 600 mV
ΔV
OD
V
OD
magnitude change 30 mV
V
OS
Offset voltage -40 ≤ T
A
≤ 85°C 1.05 1.15 1.25 V
ΔV
OS
V
OS
magnitude change 30 V
I
OS
Output short circuit current
V
O
= 0V 15 30
mA
V
OD
= 0V 7 15
Table 6. Receiver electrical characteristics (T
A
= -40 to 85 °C, V
CC
= 2.5V ± 5%, unless otherwise
specified Note: 1, 2)
Symbol Parameter Test condition Min. Typ. Max. Unit
V
IDH
Input threshold high 100 mV
V
IDL
Input threshold low -100 mV
I
IN
Input current
V
I
= 0V 42 100
μA
V
I
= 0V
CC
210