Datasheet

Data brief
For further information contact your local STMicroelectronics sales office.
June 2010 Doc ID 17629 Rev 1 1/7
7
STEVAL-PCC009V2
IBU universal interface based on the STM32x
Features
Supports two modes:
application mode: the PC GUI allows SPI,
I
2
C and UART interfacing and control of the
communication parameters
DFU mode: allows the user to change the
firmware if required to suit specific
applications
Board power supplied through a USB Mini B-
type connector
DLL files provided to allow users to create a
customized PC GUI
RoHS compliant
Description
The STEVAL-PCC009V2 board implements an
IBU universal interface (IBUUI), which is an
STM32x-based USB-to-serial interface bridge
consisting of a configurable 10-pin interface and a
30-pin interface.
The STM32x microcontroller is used as an
interface between the PC and another end
system. Various communication peripherals are
multiplexed with GPIOs, ADC and PWM channels
in both the 10-pin and 30-pin interfaces.
With these interfaces, there is a provision to
connect a device which can communicate using
I
2
C, SPI and UART. Thus, the IBUUI tool allows
users to connect a serial communication-based
device to a PC. At the same time, it allows user
control of some GPIOs available in 10-pin and 30-
pin interfaces, and sets them to input/output mode
as per application requirements.
STEVAL-PCC009V2
www.st.com

Summary of content (7 pages)