Datasheet

Data brief
For further information contact your local STMicroelectronics sales office.
August 2011 Doc ID 022109 Rev 1 1/12
12
STEVAL-IME003V1
STEVAL-IME003V1 demonstration board based on the
STHV748 high voltage pulser
Features
4-channel outputs: high voltage and low
voltage BNC connectors
Load simulator using signal equivalent circuits
Possibility to set up own load simulator
16 preset waveforms
USB connector to connect STM32 with PC and
supply power to it
4 MB serial Flash memory to host FPGA code
and waveforms
Memory expansion connector to add external
serial Flash
Connectors to supply high voltage and low
voltage to the STHV748 output stage
LEDs to monitor the power management stage
Human machine interface to select, start and
stop the generation of the preset waveforms
25 LEDs to monitor board behavior
RoHS compliant
Description
The STEVAL-IME003V1 demonstration board is
designed around the STHV748 4-channel high
voltage pulser, a state-of-the-art device designed
for ultrasound imaging applications.
The output waveforms can be displayed directly
on an oscilloscope by connecting the scope probe
to the relative BNCs. 16 preset waveforms are
available to test the HV pulser under varying
conditions.
STEVAL-IME003V1
www.st.com

Summary of content (12 pages)