Datasheet

Getting started UM1539
18/46 Doc ID 023106 Rev 1
Figure 10. STTS751 sensor address selection connector CN5
Figure 11. GUI window for the STTS751
1.2.15 GUI window for the STTS2002 temperature sensor
The STTS2002 is a digital temperature sensor with an on-chip 2 Kb EEPROM.
Below are the steps to operate the STTS2002 sensor in GUI mode:
1. Plug the daughter card of the STTS2002 on the motherboard.
2. Select the sensor option for the STTS2002 from the GUI, as shown in Figure 12.
3. Check the address from the “Choose Address” area. If the address configured onboard
(explained in Section 1.2.5) is different from the address selected from the GUI, an
AM12164v1
STTS751 sensor address selection
connector CN6