Datasheet

STEF12 Maximum ratings
Doc ID 019056 Rev 5 5/20
3 Maximum ratings
Note: Absolute maximum ratings are those values beyond which damage to the device may occur.
Functional operation under these conditions is not implied.
Table 3. Absolute maximum ratings
Symbol Parameter Value Unit
V
CC
Positive power supply voltage (steady state) -0.3 to 18
V
Positive power supply voltage (max 100ms) -0.3 to 25
V
OUT
/source (max 100ms) -0.3 to Vcc+0.3 V
I-Limit (max 100ms) -0.3 to 25 V
En/Fault -0.3 to 7 V
dv/dt -0.3 to 7 V
T
op
Operating junction temperature range
(1)
-40 to 125 °C
T
STG
Storage temperature range -65 to 150 °C
T
LEAD
Lead temperature (soldering) 10 sec 260 °C
1. The thermal limit is set above the maximum thermal rating. It is not recommended to operate the device at temperatures
greater than the maximum ratings for extended periods of time.
Table 4. Thermal data
Symbol Parameter Value Unit
R
thJA
Thermal resistance junction-ambient 52.7 °C/W
R
thJC
Thermal resistance junction-case 17.4 °C/W
Table 5. ESD performance
Symbol Parameter Test conditions Value Unit
ESD ESD protection
HBM 1 kV
MM 200 V
CDM 500 V