Datasheet

Pin configuration STCS05A
4/18
2 Pin configuration
Figure 2. Pin connections (top view)
Table 2. Pin description
Pin n° Symbol Note
1V
CC
Supply voltage
2 PWM PWM dimming input
3 EN Shutdown pin
4 DRAIN Internal N-MOSFET drain
5FB
Feedback input. The control loop regulates the current in such a way that the average
voltage at the FB input is 100 mV (nominal). The cathode of the LED and a resistor to
ground to set the LED current should be connected at this point.
6 GND Ground
7 SLOPE Capacitor for slope control
8 DISC Load disconnection flag (open drain)