Datasheet

STCN75 Description
Doc ID 13307 Rev 9 9/36
1.3.4 GND
Ground; it is the reference for the power supply. It must be connected to system ground.
1.3.5 A2, A1, A0
A2, A1, and A0 are selectable address pins for the 3 LSBs of the I
2
C interface address.
They can be set to V
DD
or GND to provide 8 unique address selections.
1.3.6 V
DD
This is the supply voltage pin, and ranges from +2.7 V to +5.5 V.