Datasheet

STA333W Electrical specification
Doc ID 13365 Rev 2 11/49
3 Electrical specification
3.1 Absolute maximum ratings
Warning: Stresses beyond those listed in Table 4: Absolute maximum
ratings may cause permanent damage to the device. These
are stress ratings only, and functional operation of the device
at these or any other conditions beyond those indicated in
Table 5: Recommended operating conditions are not implied.
Exposure to absolute-maximum-rated conditions for
extended periods may affect device reliability. In the real
application, a power supply with nominal value rated within
the limits of the recommended operating conditions, may
experience some rising beyond the maximum operating
conditions for a short time when no or very low current is
being sinked (amplifier in mute state). In this case the
reliability of the device is guaranteed, provided that the
absolute maximum ratings are not exceeded.
3.2 Recommended operating conditions
Table 4. Absolute maximum ratings
Symbol Parameter Min Typ Max Unit
V
CC
Analog supply voltage (pins VCCx) - - 23 V
V
DD
Digital supply voltage (pins VDD_DIG) - - 4.0 V
I
L
Logic input interface -0.3 - 4.0 V
T
op
Operating junction temperature 0 - 150 °C
T
stg
Storage temperature -40 - 150 °C
Table 5. Recommended operating conditions
Symbol Parameter Min Typ Max Unit
V
CC
Analog supply voltage (VCCx) 4.5 - 20.0 V
V
DD
Digital supply voltage (VDD_DIG) 2.7 3.3 3.6 V
I
L
Logic input interface 2.7 3.3 3.6 V
T
amb
Ambient temperature 0 - 70 °C