Datasheet

6 - CENTRAL PROCESSING UNIT (CPU) ST10F269

38/184

6.2 - Instruction Set Summary

The Table 4 lists the instructions of the ST10F269. The various addressing modes, instruction operation,

parameters for conditional execution of instructions, opcodes and a detailed description of each instruc-

tion can be found in the “ST10 Family Programming Manual”.

Table 4 : Instruction Set Summary

Mnemonic Description Bytes

ADD(B) Add word (byte) operands 2 / 4

ADDC(B) Add word (byte) operands with Carry 2 / 4

SUB(B) Subtract word (byte) operands 2 / 4

SUBC(B) Subtract word (byte) operands with Carry 2 / 4

MUL(U) (Un)Signed multiply direct GPR by direct GPR (16-16-bit) 2

DIV(U) (Un)Signed divide register MDL by direct GPR (16-/16-bit) 2

DIVL(U) (Un)Signed long divide reg. MD by direct GPR (32-/16-bit) 2

CPL(B) Complement direct word (byte) GPR 2

NEG(B) Negate direct word (byte) GPR 2

AND(B) Bit-wise AND, (word/byte operands) 2 / 4

OR(B) Bit-wise OR, (word/byte operands) 2 / 4

XOR(B) Bit-wise XOR, (word/byte operands) 2 / 4

BCLR Clear direct bit 2

BSET Set direct bit 2

BMOV(N) Move (negated) direct bit to direct bit 4

BAND, BOR, BXOR AND/OR/XOR direct bit with direct bit 4

BCMP Compare direct bit to direct bit 4

BFLDH/L Bit-wise modify masked high/low byte of bit-addressable direct word memory

with immediate data

CMP(B) Compare word (byte) operands 2 / 4

CMPD1/2 Compare word data to GPR and decrement GPR by 1/2 2 / 4

CMPI1/2 Compare word data to GPR and increment GPR by 1/2 2 / 4

PRIOR Determine number of shift cycles to normalize direct word GPR and store result

in direct word GPR

SHL / SHR Shift left/right direct word GPR 2

ROL / ROR Rotate left/right direct word GPR 2

ASHR Arithmetic (sign bit) shift right direct word GPR 2

MOV(B) Move word (byte) data 2 / 4

MOVBS Move byte operand to word operand with sign extension 2 / 4

MOVBZ Move byte operand to word operand with zero extension 2 / 4

JMPA, JMPI, JMPR Jump absolute/indirect/relative if condition is met 4

JMPS Jump absolute to a code segment 4

J(N)B Jump relative if direct bit is (not) set 4

JBC Jump relative and clear bit if direct bit is set 4