User's Manual
Table Of Contents
- Figure 1. ST25R3916-DISCO board (top view)
- 1 Features
- 2 Description
- 3 Quick start
- 4 MB1396 hardware
- 5 MB1414 hardware
- 6 Schematics
- Figure 9. MB1396 - Overview
- Figure 10. MB1396 - Power
- Figure 11. MB1396 - MCU
- Figure 12. MB1396 - Energy harvesting measurement
- Figure 13. MB1396 - ST Link - JTAG
- Figure 14. MB1396 - LCD
- Figure 15. MB1396 - BLE and WiFi® modules
- Figure 16. MB1396 - Connectors
- Figure 17. MB1396 - USB
- Figure 18. MB1396 - Epaper connector
- Figure 19. MB1414 - Connectors
- Figure 20. MB1414 - ST25R3916
- Figure 21. MB1414 - Antenna and external load
- 7 Federal Communications Commission (FCC) and Industry Canada (IC) compliance statements
- 8 Revision history
UM2358 Rev 2 11/31
UM2358 MB1396 hardware
30
4.3 MB1396 software development configuration
This section describes the MB1396 software development configuration and the USB
connection when the embedded ST link is used.
The J1 USB micro connector provides the ST23R391
6 powering, the J2 USB mini provides
the link for the data exchange between the board and the computer.
Figure 6. MB1396 SW development configuration