User's Manual

MB1396 hardware
UM2358-1
4.2
MB1396 jumper default configuration
This section details the MB1396 jumpers default configuration (recommended setting), set
at kit delivery. With these parameters the USB micro connector provides the kit powering.
Figure 5. MB1396 default configuration
Table 2. Jumpers configuration
Connector
Position
Description
JP2
JP3
ST link UART debug features
Closed 1-2
JP10
JP13
JP14
JP16
Card powered by USB
Closed 2-3
Closed 1-2
Card Powered by micro USB
Board powering special feature
10/31
UM235x Rev 02