User manual

DocID026171 Rev 6 77/79
VL6180X Revision history
78
11 Revision history
Table 28. Document revision history
Date Revision Changes
23-Sep-2013 1 Initial release.
30-Jan-2014 1.1
General update for latest ROM revision:
Section 1.1: Technical specification updated
Section 1.4: Application schematic updated
Section 1.5: Recommended solder pad dimensions updated
Notes added to Figure 5.: Recommended reflow profile
Section 2.13: Ambient light sensor (ALS) updated.
Section 3.1: Absolute maximum ratings added
Section 3.2: Normal operating conditions extended
Section 4: Performance specification added
Revised outline drawing added to Section 7: Outline drawing
Class 1 laser product label added to Section 7: Outline drawing
Section 9: Ordering information added information relating to
device marking and package labeling
02-Apr-2014 1.2
Updates to the following sections:
Section 1.5: Recommended solder pad dimensions
Section 3.2: Normal operating conditions
Section 3.4: Electrical characteristics
Section 4.1: Proximity ranging (0 to 100mm)
Added Section 4.2: ALS performance
Corrected error codes in.Section 6.2.38: RESULT__ALS_STATUS
Updated Section 6.2.20:
SYSRANGE__MAX_CONVERGENCE_TIME
Product code changed to VL6180X
09-Apr-14 2
Add documentation reference number (026171)
Update Disclaimer
15-May-14 3
ALS linearity spec updated in Section 4.2: ALS performance
Updated some detail in Table 1.: Technical specification
Added comment to Section 1.3: Device pinout stating that pins
labeled ‘no connect’ can optionally be connected to ground
Added test condition to Section 3.3: Current consumption
Errata corrections in 6.2.8, 6.2.35 and 6.2.54
Section 7: Outline drawing updated (no dimensional changes)
Dry bake conditions updated in Section 9.4: Storage
28-May-14 4 Added Section 8.1: Compliance