User manual

DocID026171 Rev 6 75/79
VL6180X Ordering information
78
9.4 Storage
The Root part number 1 is a MSL 3 package.
After this limit, dry bake to be done; 3 hours at 125
o
C.
9.5 ROHS compliance
The Root part number 1 is Ecopack2 compliant as per ST definition.
Devices which are ROHS compliant even with use of ROHS exemption(s) and free of
Halogenated flame retardant are named ECOPACK2 devices with the following definition:
• ROHS compliant even with use of ROHS exemption(s)
• 500 ppm maximum of Antimony as oxide or organic compound in each organic assy
Materials (glue, substrate, mod compounds, housing...). Antimony in ceramic parts, in
glass and in solder alloy is not restricted.
• 900 ppm maximum Bromine + Chlorine in each organic ass materials (glue, substrate,
mold compounds, housing...)
These values are referring to maximum total content not to extractable ions content.
Purchasing specification of assembly materials can impose lower values for technical
reasons.
ECOPACK2 devices are of course fully compliant to ST banned and declarable substances
specification and for example cannot contain red Phosphorus flame retardant.
Table 27. Storage conditions
Level
Floor Life (out of bag) at Factory
Ambient <30
o
C/60% RH
31 Week