Data Sheet

ManualsBrandsSTMicroelectronics ManualsDevelopment Kit Add-onsDevelopment board 1 pc(s)

NUCLEO-G474RE example. Boards with

different references show different

layouts. Picture is not contractual.

Features

• Common features

– STM32 microcontroller in LQFP64 package

– 1 user LED shared with ARDUINO

– 1 user and 1 reset push-buttons

– 32.768 kHz crystal oscillator

– Board connectors:

◦ ARDUINO

Uno V3 expansion connector

◦ ST morpho extension pin headers for full access to all STM32 I/Os

– Flexible power-supply options: ST-LINK, USB V

BUS

, or external sources

– On-board ST-LINK debugger/programmer with USB re-enumeration

capability: mass storage, Virtual COM port and debug port

– Comprehensive free software libraries and examples available with the

STM32Cube MCU Package

– Support of a wide choice of Integrated Development Environments (IDEs)

including IAR Embedded Workbench

, MDK-ARM, and STM32CubeIDE

• Board-specific features

– External SMPS to generate V

core

logic supply

– 24 MHz HSE

– Board connectors:

◦ External SMPS experimentation dedicated connector

◦ Micro-AB or Mini-AB USB connector for the ST-LINK

◦ MIPI

debug connector

– Arm

Mbed Enabled

™

compliant

Description

The STM32 Nucleo-64 board provides an affordable and flexible way for users to try

out new concepts and build prototypes by choosing from the various combinations of

performance and power consumption features, provided by the STM32

microcontroller. For the compatible boards, the external SMPS significantly reduces

power consumption in Run mode.

The ARDUINO

Uno V3 connectivity support and the ST morpho headers allow the

easy expansion of the functionality of the STM32 Nucleo open development platform

with a wide choice of specialized shields.

The STM32 Nucleo-64 board does not require any separate probe as it integrates the

ST-LINK debugger/programmer.

The STM32 Nucleo-64 board comes with the STM32 comprehensive free software

libraries and examples available with the STM32Cube MCU Package.

Product status link

NUCLEO-XXXXRX

NUCLEO-F030R8, NUCLEO-F070RB,

NUCLEO-F072RB, NUCLEO-F091RC,

NUCLEO-F103RB, NUCLEO-F302R8,

NUCLEO-F303RE, NUCLEO-F334R8,

NUCLEO-F401RE, NUCLEO-F410RB,

NUCLEO-F411RE, NUCLEO-F446RE,

NUCLEO-G070RB, NUCLEO-G071RB,

NUCLEO-G0B1RE, NUCLEO-G431RB,

NUCLEO-G474RE, NUCLEO-G491RE,

NUCLEO-L010RB, NUCLEO-L053R8,

NUCLEO-L073RZ, NUCLEO-L152RE,

NUCLEO-L452RE, NUCLEO-L476RG.

NUCLEO-XXXXRX-P

NUCLEO-L412RB-P,

NUCLEO-L433RC-P,

NUCLEO-L452RE-P.

STM32 Nucleo-64 boards

NUCLEO‑XXXXRX NUCLEO‑XXXXRX‑P

Data brief

DB2196 - Rev 14 - October 2020

For further information contact your local STMicroelectronics sales office.

www.st.com

Downloaded from Arrow.com.

Summary of content (7 pages)

PAGE 1
NUCLEO‑XXXXRX NUCLEO‑XXXXRX‑P Data brief STM32 Nucleo-64 boards Features • Common features – STM32 microcontroller in LQFP64 package – – – – 1 user LED shared with ARDUINO® 1 user and 1 reset push-buttons 32.768 kHz crystal oscillator Board connectors: – ◦ ARDUINO® Uno V3 expansion connector ◦ ST morpho extension pin headers for full access to all STM32 I/Os Flexible power-supply options: ST-LINK, USB VBUS, or external sources – NUCLEO-G474RE example.
PAGE 2
NUCLEO‑XXXXRX NUCLEO‑XXXXRX‑P Ordering information 1 Ordering information To order an STM32 Nucleo-64 board, refer to Table 1. For a detailed description of each board, refer to its user manual on the product web page. Additional information is available from the datasheet and reference manual of the target STM32. Table 1.
PAGE 3
NUCLEO‑XXXXRX NUCLEO‑XXXXRX‑P Ordering information Order code Board reference User manual Target STM32 NUCLEO-G0B1RE MB1360 UM2324 STM32G0B1RET6 NUCLEO-G431RB NUCLEO-G474RE STM32G431RBT6U MB1367 UM2505 NUCLEO-G491RE STM32G491RET6U NUCLEO-L010RB STM32L010RBT6 NUCLEO-L053R8 STM32L053R8T6 MB1136 UM1724 NUCLEO-L073RZ STM32L073RZT6U NUCLEO-L152RE STM32L152RET6 NUCLEO-L412RB-P STM32L412RBT6PU MB1319 UM2206 NUCLEO-L433RC-P STM32L433RCT6PU NUCLEO-L452RE MB1136 UM1724 STM32L452RET6U
PAGE 4
NUCLEO‑XXXXRX NUCLEO‑XXXXRX‑P Product marking 1.1 Product marking The sticker located on the top or bottom side of the PCB board shows the information about product identification such as board reference, revision, and serial number. The first identification line has the following format: “MBxxxx-Variant-yzz”, where “MBxxxx” is the board reference, “Variant” (optional) identifies the mounting variant when several exist, "y" is the PCB revision and "zz" is the assembly revision: for example B01.
PAGE 5
NUCLEO‑XXXXRX NUCLEO‑XXXXRX‑P Development environment 2 Development environment 2.1 System requirements • Windows® OS (7, 8 and 10), Linux® 64-bit, or macOS® • USB Type-A or USB Type-C® to Micro-B cable, or USB Type-A or USB Type-C® to Mini-B cable (depending on the board reference) Note: macOS® is a trademark of Apple Inc. registered in the U.S. and other countries. All other trademarks are the property of their respective owners. 2.
PAGE 6
NUCLEO‑XXXXRX NUCLEO‑XXXXRX‑P Revision history Table 3. Document revision history Date Version Changes 10-Feb-2014 1 Initial release. 13-Feb-2014 2 Added Table 1: Device summary and updated Table 2: Ordering information. 11-Apr-2014 3 Extended the applicability to NUCLEO-F302R8. Updated Table 1: Device summary and Table 2: Ordering information. 26-May-2014 4 Extended the applicability to NUCLEO-L053R8, NUCLEO-F072RB, NUCLEOF334R8 and NUCLEO-F411RE. Updated Table 1 and Table 2.
PAGE 7
NUCLEO‑XXXXRX NUCLEO‑XXXXRX‑P IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.