User's Manual

Signal Connector Pin number NUCLEO-L476RG X-NUCLEO-NFC08A1
D1
CN9 Digital
2 PA2 NC
D0 1 PA3 NC
3.1 Host interface and GPIO connection
The X-NUCLEO-NFC08A1 expansion board contains the ST25R3916-AQFT chip and is powered by the STM32
Nucleo board.
The ST25R3916B is driven by the microcontroller via SPI interface.
The six LEDs indicate the detected RFID technology (for example, ISO14443 Type A for LED4).
3.2 X-NUCLEO-NFC08A1 expansion board component placement
Figure 2. X-NUCLEO-NFC08A1 component placement
1. General purpose LEDs
2. ST25R3916B
3. Matching circuit
4. 47x34 mm four-turn antenna
1
2
3
4
3.3
ST25R3916B device
The ST25R3916B is a high performance NFC universal device supporting NFC initiator, NFC target, NFC reader,
and NFC card emulation modes.
UM3007
Host interface and GPIO connection
UM3007 - Rev 1
page 6/18