User's Manual

DocID026680 Rev 1 3/16
UM1799 Getting started
1 Getting started
This section describes the hardware requirements for the X-NUCLEO-NFC03A1
evaluation board.
1.1 Hardware requirements
The X-NUCLEO-NFC03A1 is an expansion board for use with STM32 Nucleo boards. To
function correctly, the X-NUCLEO-IDB05A1 must be connected to the STM32 Nucleo
board as shown in Figure 2: "X-NUCLEO-NFC03A1 plugged into an STM32 Nucleo
board through the Arduino UNO R3 connector" below.
The STM32 Nucleo firmware and related documentation is available at
http://www.st.com/stm32nucleo
Figure 2: X-NUCLEO-NFC03A1 plugged into an STM32 Nucleo board through the Arduino UNO
R3 connector