User's Manual

Figure 13. Power supply input from 5V_EXT (5 V
, 500 mA maximum)
External power supply input from 5 V USB charger
When the STM32WL Nucleo-64
board is power-supplied by a USB charger on CN1 (Refer to Table 8 and
Figure 14), the jumper configuration must be the following: jumper JP4 [78] on 5V_CHGR.
Table 8. External power sources: 5V_CHGR (5 V)
Input power name Connector pins Voltage range Maximum current
5V_CHGR CN1 5 V -
UM2592
Power supply
UM2592 - Rev 2
page 20/50