User's Manual

2 Ordering information
To order an STM32MP157 Evaluation board, refer to T
able 1. Additional information is available from the
datasheet and reference manual of the target STM32.
Table 1. List of available products
Order code Board reference Target STM32
Differentiating
features
STM32MP157F-EV1
• MB1262: mother board
•
MB1263: MPU subsystem daughterboard
• MB1230: DSI display board
• MB1379: camera board
STM32MP157FAA1
Secure Boot and
cryptography
2.1 Product marking
Evaluation tools marked as “ES” or “E” are not yet qualified and therefore not ready to be used as reference
design or in production. Any consequences deriving from such usage will not be at ST charge. In no event, ST will
be liable for any customer usage of these engineering sample tools as reference designs or in production.
“E” or “ES” marking examples of location:
•
On the targeted STM32 that is soldered on the board (For an illustration of STM32 marking, refer to the
STM32 datasheet “Package information” paragraph at the www.st.com website).
• Next to the evaluation tool ordering part number that is stuck or silk-screen printed on the board.
2.2 Codification
The meaning of the codification is explained in T
able 2.
Table 2. Codification explanation
STM32MP1XXY-EVZ Description Example: STM32MP157F-EV1
STM32MP1 MPU series in STM32 Arm Cortex MPUs STM32MP1 Series
XX MPU product line in the series STM32MP157
Y
Options:
•
F: Secure Boot, cryptography hardware, 800 MHz
increased frequency
Secure Boot, cryptography hardware,
800 MHz increased frequency
EVZ
Evaluation board configuration
•
EV1: with PMIC
PMIC
The order code is mentioned on a sticker placed on the top or bottom side of the board.
UM2648
Ordering information
UM2648 - Rev 1
page 3/61