Datasheet

Signal description M95256-W M95256-R M95256-DR M95256-DF
10/52 DocID12276 Rev 20
3.6 Write Protect (W)
The main purpose of this input signal is to freeze the size of the area of memory that is
protected against Write instructions (as specified by the values in the BP1 and BP0 bits of
the Status Register).
This pin must be driven either high or low, and must be stable during all Write instructions.
3.7 V
CC
supply voltage
V
CC
is the supply voltage.
3.8 V
SS
ground
V
SS
is the reference for all signals, including the V
CC
supply voltage.