User's Manual

ManualsBrandsSTMICROELECTRONICS ManualsAutomotiveIn-car Telematics Device

M400 User Manual

Revision 2

The user manual describes the basic operation of M400. The M400 device allows members to have on-

demand access to Zipcars. The M400 device complies with all regulatory and FCC/IC guidelines. Please

find the details on the last page of this document.

Major Components

• M400

• Vehicle specific harness

• Traka

• Card Reader

• Antenna

M400 Overview

Summary of content (4 pages)

PAGE 1
M400 User Manual Revision 2 The user manual describes the basic operation of M400. The M400 device allows members to have ondemand access to Zipcars. The M400 device complies with all regulatory and FCC/IC guidelines. Please find the details on the last page of this document. Major Components • • • • • M400 Vehicle specific harness Traka Card Reader Antenna M400 Overview © 2021 Zipcar, Inc. All Rights Reserved. Confidential & Proprietary Information of Zipcar, Inc.
PAGE 2
Radios The M400 has Bluetooth and 4G cellular radio capabilities. 1. Bluetooth a. Bluetooth radio allows Zipcar to let members access Zipcars using their mobile devices. 2. 4G Cellular a. Allows Zipcar to access vehicle specific and reservation specific data along with device health information. This helps Zipcar allow cars to be used as self-service vehicle rentals. GPS GPS data is used by Zipcar to find missing cars. GPS data is always used with full compliance with State regulations for GPS use.
PAGE 3
• • • • • • Expandable Ports o Card Reader o Traka o Serial Port o SPI Port OTA (Over the Air) firmware update capabilities 3 Tri-state LED’s to indicate different status of the device Integrated GPS/GSM external under-dash mount antenna 1 OBDII Port 1 CAN Port Installation 1. Connect Antenna a. Antenna placement must provide a minimum separation distance of at least 20 cm from all persons. 2. Connect card reader a.
PAGE 4
Legal Notices NOTICE: This device complies with Part 15 of the FCC Rules [and with Industry Canada licence-exempt RSS standard(s)]. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.