Datasheet
Table Of Contents
- 1 Description
- 2 Signal description
- 3 Memory organization
- 4 Device operation
- 5 Instructions
- 6 Initial delivery state
- 7 Maximum rating
- 8 DC and AC parameters
- Table 5. Operating conditions (voltage range W)
- Table 6. Operating conditions (voltage range R)
- Table 7. Operating conditions (voltage range F, for devices identified by process letter T)
- Table 8. Operating conditions (voltage range F, for all other devices)
- Table 9. AC measurement conditions
- Figure 11. AC measurement I/O waveform
- Table 10. Input parameters
- Table 11. Cycling performance
- Table 12. Memory cell data retention
- Table 13. DC characteristics (M24C08-W, device grade 6)
- Table 14. DC characteristics (M24C08-R, device grade 6)
- Table 15. DC characteristics (M24C08-F device)
- Table 16. 400 kHz AC characteristics
- Table 17. 100 kHz AC characteristics (I2C Standard mode)
- Figure 12. Maximum Rbus value versus bus parasitic capacitance (Cbus) for an I2C bus at maximum frequency fC = 400 kHz
- Figure 13. AC waveforms
- 9 Package mechanical data
- Figure 14. TSSOP8 – 8-lead thin shrink small outline, package outline
- Table 18. TSSOP8 – 8-lead thin shrink small outline, package mechanical data
- Figure 15. SO8N – 8-lead plastic small outline, 150 mils body width, package outline
- Table 19. SO8N – 8-lead plastic small outline, 150 mils body width, package data
- Figure 16. PDIP8 – 8-pin plastic DIP, 0.25 mm lead frame, package outline
- Table 20. PDIP8 – 8-pin plastic DIP, 0.25 mm lead frame, package mechanical data
- Figure 17. UFDFPN8 (MLP8) – package outline (UFDFPN: Ultra thin Fine pitch Dual Flat Package, No lead)
- Table 21. UFDFPN8 (MLP8) – package dimensions (UFDFPN: Ultra thin Fine pitch Dual Flat Package, No lead)
- Figure 18. M24C08-FCS5TP/S WLCSP package outline
- Table 22. M24C08-FCS5TP/S WLCSP package data
- Figure 19. Thin M24C08-FCT5TP/S WLCSP package outline
- Table 23. Thin M24C08-FCT5TP/S WLCSP package data
- 10 Part numbering
- 11 Revision history

Description M24C08-W M24C08-R M24C08-F
6/40 DocID023924 Rev 3
1 Description
The M24C08 is an 8-Kbit I
2
C-compatible EEPROM (Electrically Erasable PROgrammable
Memory) organized as 1 K × 8
bits.
The M24C08-W can be accessed with a supply voltage from 2.5 V to 5.5 V, the M24C08-R
can be accessed with a supply voltage from 1.8
V to 5.5 V, and the M24C08-F can be
accessed either with a supply voltage from 1.7 V to 5.5
V (over the full temperature range)
or with an extended supply voltage from 1.6
V to 1.7 V. All these devices operate with a
clock frequency of 400 kHz.
Figure 1. Logic diagram
Figure 2. 8-pin package connections, top view
1. NC: not connected.
2. See Section 9: Package mechanical data for package dimensions, and how to identify pin 1.
Table 1. Signal names
Signal name Function Direction
E2 Chip Enable Input
SDA Serial Data I/O
SCL Serial Clock Input
WC
Write Control Input
V
CC
Supply voltage -
V
SS
Ground -
-36
3$!
6
##
-XXX
7#
3#,
6
33
%
-36
3$!6
33
3#,
7#.#
.# 6
##
%