Datasheet
Table Of Contents
- 1 Description
- 2 Signal description
- 3 Memory organization
- 4 Device operation
- 5 Instructions
- 6 Initial delivery state
- 7 Maximum rating
- 8 DC and AC parameters
- Table 5. Operating conditions (voltage range W)
- Table 6. Operating conditions (voltage range R)
- Table 7. Operating conditions (voltage range F, for devices identified by process letter T)
- Table 8. Operating conditions (voltage range F, for all other devices)
- Table 9. AC measurement conditions
- Figure 11. AC measurement I/O waveform
- Table 10. Input parameters
- Table 11. Cycling performance
- Table 12. Memory cell data retention
- Table 13. DC characteristics (M24C08-W, device grade 6)
- Table 14. DC characteristics (M24C08-R, device grade 6)
- Table 15. DC characteristics (M24C08-F device)
- Table 16. 400 kHz AC characteristics
- Table 17. 100 kHz AC characteristics (I2C Standard mode)
- Figure 12. Maximum Rbus value versus bus parasitic capacitance (Cbus) for an I2C bus at maximum frequency fC = 400 kHz
- Figure 13. AC waveforms
- 9 Package mechanical data
- Figure 14. TSSOP8 – 8-lead thin shrink small outline, package outline
- Table 18. TSSOP8 – 8-lead thin shrink small outline, package mechanical data
- Figure 15. SO8N – 8-lead plastic small outline, 150 mils body width, package outline
- Table 19. SO8N – 8-lead plastic small outline, 150 mils body width, package data
- Figure 16. PDIP8 – 8-pin plastic DIP, 0.25 mm lead frame, package outline
- Table 20. PDIP8 – 8-pin plastic DIP, 0.25 mm lead frame, package mechanical data
- Figure 17. UFDFPN8 (MLP8) – package outline (UFDFPN: Ultra thin Fine pitch Dual Flat Package, No lead)
- Table 21. UFDFPN8 (MLP8) – package dimensions (UFDFPN: Ultra thin Fine pitch Dual Flat Package, No lead)
- Figure 18. M24C08-FCS5TP/S WLCSP package outline
- Table 22. M24C08-FCS5TP/S WLCSP package data
- Figure 19. Thin M24C08-FCT5TP/S WLCSP package outline
- Table 23. Thin M24C08-FCT5TP/S WLCSP package data
- 10 Part numbering
- 11 Revision history
Part numbering M24C08-W M24C08-R M24C08-F
38/40 DocID023924 Rev 3
10 Part numbering
Table 24. Ordering information scheme
Example: M24C08 W MC 6 T P
Device type
M24 = I
2
C serial access EEPROM
Device function
C08 = 8 Kbit (1 K x 8 bit)
Operating voltage
W = V
CC
= 2.5 V to 5.5 V
R = V
CC
= 1.8 V to 5.5 V
F = V
CC
= 1.6 V or 1.7 V to 5.5 V
Package
BN = PDIP8
(1)
1. Not recommended for new designs.
MN = SO8 (150 mil width)
DW = TSSOP8 (169 mil width)
MC = UFDFPN8 (MLP8)
CS = Standard WLCSP (chip scale package)
CT = Thin WLCSP (chip scale package)
Device grade
5 = Consumer: device tested with standard test flow over –20 to 85°C
6 = Industrial: device tested with standard test flow over –40 to 85 °C
Option
blank = standard packing
T = Tape and reel packing
Plating technology
P or G = ECOPACK
®
(RoHS compliant)