Datasheet
Table Of Contents
- 1 Description
- 2 Signal description
- 3 Memory organization
- 4 Device operation
- 5 Instructions
- 6 Initial delivery state
- 7 Maximum rating
- 8 DC and AC parameters
- Table 5. Operating conditions (voltage range W)
- Table 6. Operating conditions (voltage range R)
- Table 7. Operating conditions (voltage range F, for devices identified by process letter T)
- Table 8. Operating conditions (voltage range F, for all other devices)
- Table 9. AC measurement conditions
- Figure 11. AC measurement I/O waveform
- Table 10. Input parameters
- Table 11. Cycling performance
- Table 12. Memory cell data retention
- Table 13. DC characteristics (M24C08-W, device grade 6)
- Table 14. DC characteristics (M24C08-R, device grade 6)
- Table 15. DC characteristics (M24C08-F device)
- Table 16. 400 kHz AC characteristics
- Table 17. 100 kHz AC characteristics (I2C Standard mode)
- Figure 12. Maximum Rbus value versus bus parasitic capacitance (Cbus) for an I2C bus at maximum frequency fC = 400 kHz
- Figure 13. AC waveforms
- 9 Package mechanical data
- Figure 14. TSSOP8 – 8-lead thin shrink small outline, package outline
- Table 18. TSSOP8 – 8-lead thin shrink small outline, package mechanical data
- Figure 15. SO8N – 8-lead plastic small outline, 150 mils body width, package outline
- Table 19. SO8N – 8-lead plastic small outline, 150 mils body width, package data
- Figure 16. PDIP8 – 8-pin plastic DIP, 0.25 mm lead frame, package outline
- Table 20. PDIP8 – 8-pin plastic DIP, 0.25 mm lead frame, package mechanical data
- Figure 17. UFDFPN8 (MLP8) – package outline (UFDFPN: Ultra thin Fine pitch Dual Flat Package, No lead)
- Table 21. UFDFPN8 (MLP8) – package dimensions (UFDFPN: Ultra thin Fine pitch Dual Flat Package, No lead)
- Figure 18. M24C08-FCS5TP/S WLCSP package outline
- Table 22. M24C08-FCS5TP/S WLCSP package data
- Figure 19. Thin M24C08-FCT5TP/S WLCSP package outline
- Table 23. Thin M24C08-FCT5TP/S WLCSP package data
- 10 Part numbering
- 11 Revision history

Package mechanical data M24C08-W M24C08-R M24C08-F
30/40 DocID023924 Rev 3
9 Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK
®
packages, depending on their level of environmental compliance. ECOPACK
®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK
®
is an ST trademark.
Figure 14. TSSOP8 – 8-lead thin shrink small outline, package outline
1. Drawing is not to scale.
Table 18. TSSOP8 – 8-lead thin shrink small outline, package mechanical data
Symbol
millimeters inches
(1)
1. Values in inches are converted from mm and rounded to four decimal digits.
Typ. Min. Max. Typ. Min. Max.
A – – 1.200 – – 0.0472
A1 – 0.050 0.150 – 0.0020 0.0059
A2 1.000 0.800 1.050 0.0394 0.0315 0.0413
b – 0.190 0.300 – 0.0075 0.0118
c – 0.090 0.200 – 0.0035 0.0079
CP – – 0.100 – – 0.0039
D 3.000 2.900 3.100 0.1181 0.1142 0.1220
e 0.650 – – 0.0256 – –
E 6.400 6.200 6.600 0.2520 0.2441 0.2598
E1 4.400 4.300 4.500 0.1732 0.1693 0.1772
L 0.600 0.450 0.750 0.0236 0.0177 0.0295
L1 1.000 – – 0.0394 – –
α – 0° 8° – 0° 8°