Datasheet

15/28
M24C16, M24C08, M24C04, M24C02, M24C01
MAXIMUM RATING
Stressing the device outside the ratings listed in
Table 5. may cause permanent damage to the de-
vice. These are stress ratings only, and operation
of the device at these, or any other conditions out-
side those indicated in the Operating sections of
this specification, is not implied. Exposure to Ab-
solute Maximum Rating conditions for extended
periods may affect device reliability. Refer also to
the STMicroelectronics SURE Program and other
relevant quality documents.
Table 5. Absolute Maximum Ratings
Note: 1. T
LEAD
max must not be applied for more than 10s.
2. AEC-Q100-002 (compliant with JEDEC Std JESD22-A114A, C1=100pF, R1=1500Ω, R2=500Ω).
Symbol Parameter Min. Max. Unit
T
A
Ambient Operating Temperature –40 130 °C
T
STG
Storage Temperature –65 150 °C
T
LEAD
PDIP-Specific Lead Temperature during Soldering
260
(1)
°C
V
IO
Input or Output range –0.50 6.5 V
V
CC
Supply Voltage –0.50 6.5 V
V
ESD
Electrostatic Discharge Voltage (Human Body model)
(2)
–4000 4000 V