Datasheet

M24C16, M24C08, M24C04, M24C02, M24C01
16/28
DC AND AC PARAMETERS
This section summarizes the operating and mea-
surement conditions, and the DC and AC charac-
teristics of the device. The parameters in the DC
and AC Characteristic tables that follow are de-
rived from tests performed under the Measure-
ment Conditions summarized in the relevant
tables. Designers should check that the operating
conditions in their circuit match the measurement
conditions when relying on the quoted parame-
ters.
Table 6. Operating Conditions (M24Cxx-W)
Table 7. Operating Conditions (M24Cxx-R)
Table 8. DC Characteristics (M24Cxx-W, Device Grade 6)
Note: 1. The voltage source driving only E0, E1 and E2 inputs must provide an impedance of less than 1kOhm.
Symbol Parameter Min. Max. Unit
V
CC
Supply Voltage 2.5 5.5 V
T
A
Ambient Operating Temperature (Device Grade 6) –40 85 °C
Ambient Operating Temperature (Device Grade 3) –40 125 °C
Symbol Parameter Min. Max. Unit
V
CC
Supply Voltage 1.8 5.5 V
T
A
Ambient Operating Temperature –40 85 °C
Symbol Parameter
Test Condition
(in addition to those in Table 6.)
Min. Max. Unit
I
LI
Input Leakage Current
(SCL, SDA, E0, E1,and E2)
V
IN
= V
SS
or V
CC
± 2 µA
I
LO
Output Leakage Current
V
OUT
= V
SS
or V
CC,
SDA in Hi-Z
± 2 µA
I
CC
Supply Current
V
CC
=5V, f
c
=400kHz (rise/fall time < 30ns)
2mA
V
CC
=2.5V, f
c
=400kHz (rise/fall time < 30ns)
1mA
I
CC1
Stand-by Supply Current
V
IN
= V
SS
or V
CC
, for 2.5V < V
CC
= < 5.5V
1µA
V
IL
Input Low Voltage
(1)
–0.45
0.3V
CC
V
V
IH
Input High Voltage
(1)
0.7V
CC
V
CC
+1
V
V
OL
Output Low Voltage
I
OL
= 2.1mA when V
CC
= 2.5V or
I
OL
= 3mA when V
CC
= 5.5V
0.4 V