Datasheet
Table Of Contents
- Table 1. Device summary
- 1 Package pin connections
- 2 Absolute maximum ratings and operating conditions
- 3 Electrical characteristics
- Table 4. Electrical characteristics at Vcc+ = 2.5 V with Vcc- = 0 V, Vicm = Vcc/2, Tamb = 25° C, and RL connected to Vcc/2 (unless otherwise specified)
- Table 5. Shutdown characteristics VCC = 2.5 V
- Table 6. Electrical characteristics at Vcc+ = 2.7 V with Vcc- = 0 V, Vicm = Vcc/2, Tamb = 25° C, and RL connected to Vcc/2 (unless otherwise specified)
- Table 7. Shutdown characteristics VCC = 2.7 V
- Table 8. Electrical characteristics at Vcc+ = 5 V with Vcc- = 0 V, Vicm = Vcc/2, Tamb = 25° C, and RL connected to Vcc/2 (unless otherwise specified)
- Table 9. Shutdown characteristics VCC = 5 V
- Figure 2. Supply current vs. supply voltage at Vicm = VCC/2
- Figure 3. Supply current vs. Vicm at VCC = 5 V
- Figure 4. Vio distribution at VCC = 5 V
- Figure 5. Input offset voltage vs. input common mode voltage at VCC = 5 V
- Figure 6. Output current vs. output voltage at VCC = 2.7 V
- Figure 7. Output current vs. output voltage at VCC = 5 V
- Figure 8. Output current vs. supply voltage at Vicm = VCC/2
- Figure 9. Voltage gain and phase with CL = 40 pF
- Figure 10. Voltage gain and phase with CL = 100 pF
- Figure 11. Voltage gain and phase with CL = 200 pF
- Figure 12. Phase margin vs. output current at VCC = 5 V
- Figure 13. Stability in follower configuration
- Figure 14. Positive and negative slew rate vs. supply voltage
- Figure 15. Positive slew rate at VCC = 5 V with CL = 100 pF
- Figure 16. Negative slew rate at VCC = 5 V with CL = 100 pF
- Figure 17. Noise vs. frequency at VCC = 5 V
- Figure 18. 0.1 Hz to 10 Hz noise at VCC = 5 V
- Figure 19. Distortion + noise vs. frequency
- Figure 20. Distortion + noise vs. output voltage
- 4 Application information
- 5 Package information
- 5.1 SC70-5 (or SOT323-5) package information
- 5.2 SOT23-5 package information
- 5.3 SOT23-6 package information
- 5.4 DFN8 2 x 2 mm package information
- 5.5 MiniSO-8 package information
- 5.6 MiniSO-10 package information
- 5.7 TSSOP14 package information
- 5.8 TSSOP16 package information
- 5.9 SO-8 package information
- 5.10 SO-14 package information
- 6 Ordering information
- 7 Revision history
Electrical characteristics LMV82x, LMV82xA
6/32 Doc ID 022467 Rev 3
3 Electrical characteristics
Table 4. Electrical characteristics at V
cc+
= 2.5 V with V
cc-
= 0 V, V
icm
= V
cc
/2, T
amb
= 25° C, and
R
L
connected to V
cc
/2 (unless otherwise specified)
Symbol Parameter Conditions Min. Typ. Max. Unit
DC performance
V
io
Input offset voltage
LMV82xA 0.8
mV
LMV82x 3.5
LMV82xA, -40°C < T< 125°C 2
LMV82x, -40°C < T< 125°C 4
V
CC
-V
OH
High level output voltage
R
L
= 600 Ω 220
R
L
= 600 Ω, -40°C < T< 125°C 320
R
L
= 2 kΩ 120
R
L
= 2 kΩ, -40°C < T< 125°C 220
V
OL
Low level output voltage
R
L
= 600 Ω 220
R
L
= 600 Ω, -40°C < T< 125°C 320
R
L
= 2 kΩ 120
R
L
= 2 kΩ, -40°C < T< 125°C 200
I
out
I
sink
(V
out
= V
cc
)
V
id
= -1 V
5
mA
-40°C < T< 125°C 5
I
source
(V
out
= 0 V)
V
id
= 1 V
5
-40°C < T< 125°C 5