Datasheet
Table Of Contents
- Table 1. Device summary
- 1 Package pin connections
- 2 Absolute maximum ratings and operating conditions
- 3 Electrical characteristics
- Table 4. Electrical characteristics at Vcc+ = 2.5 V with Vcc- = 0 V, Vicm = Vcc/2, Tamb = 25° C, and RL connected to Vcc/2 (unless otherwise specified)
- Table 5. Shutdown characteristics VCC = 2.5 V
- Table 6. Electrical characteristics at Vcc+ = 2.7 V with Vcc- = 0 V, Vicm = Vcc/2, Tamb = 25° C, and RL connected to Vcc/2 (unless otherwise specified)
- Table 7. Shutdown characteristics VCC = 2.7 V
- Table 8. Electrical characteristics at Vcc+ = 5 V with Vcc- = 0 V, Vicm = Vcc/2, Tamb = 25° C, and RL connected to Vcc/2 (unless otherwise specified)
- Table 9. Shutdown characteristics VCC = 5 V
- Figure 2. Supply current vs. supply voltage at Vicm = VCC/2
- Figure 3. Supply current vs. Vicm at VCC = 5 V
- Figure 4. Vio distribution at VCC = 5 V
- Figure 5. Input offset voltage vs. input common mode voltage at VCC = 5 V
- Figure 6. Output current vs. output voltage at VCC = 2.7 V
- Figure 7. Output current vs. output voltage at VCC = 5 V
- Figure 8. Output current vs. supply voltage at Vicm = VCC/2
- Figure 9. Voltage gain and phase with CL = 40 pF
- Figure 10. Voltage gain and phase with CL = 100 pF
- Figure 11. Voltage gain and phase with CL = 200 pF
- Figure 12. Phase margin vs. output current at VCC = 5 V
- Figure 13. Stability in follower configuration
- Figure 14. Positive and negative slew rate vs. supply voltage
- Figure 15. Positive slew rate at VCC = 5 V with CL = 100 pF
- Figure 16. Negative slew rate at VCC = 5 V with CL = 100 pF
- Figure 17. Noise vs. frequency at VCC = 5 V
- Figure 18. 0.1 Hz to 10 Hz noise at VCC = 5 V
- Figure 19. Distortion + noise vs. frequency
- Figure 20. Distortion + noise vs. output voltage
- 4 Application information
- 5 Package information
- 5.1 SC70-5 (or SOT323-5) package information
- 5.2 SOT23-5 package information
- 5.3 SOT23-6 package information
- 5.4 DFN8 2 x 2 mm package information
- 5.5 MiniSO-8 package information
- 5.6 MiniSO-10 package information
- 5.7 TSSOP14 package information
- 5.8 TSSOP16 package information
- 5.9 SO-8 package information
- 5.10 SO-14 package information
- 6 Ordering information
- 7 Revision history
LMV82x, LMV82xA Ordering information
Doc ID 022467 Rev 3 29/32
6 Ordering information
Table 21. Order codes (with shutdown pin)
Table 20. Order codes
Order code Temperature range Package Packing Marking
LMV821ICT
-40 ° C to +125 ° C
SC70-5
Tape & reel
K1S
LMV821ILT SOT23-5 K155
LMV822IQ2T DFN8 2x2 K1S
LMV822IST MiniSO8 K155
LMV822IDT SO8 LMV822I
LMV824IPT TSSOP14 LMV824I
LMV824IDT SO14 LMV824I
LMV821AICT
-40 ° C to +125 ° C
SC70-5
Tape & reel
K1T
LMV821AILT SOT23-5 K156
LMV822AIST MiniSO8 K156
LMV822AIDT SO8 LMV822AI
LMV824AIPT TSSOP14 LMV824AI
LMV824AIDT SO14 LMV824AI
Order code Temperature range Package Packing Marking
LMV820ILT
-40 ° C to +125 ° C
SOT23-6
Tape & reel
K155
LMV823IST MiniSO10 K155
LMV825IPT TSSOP16 LMV825I
LMV820AILT
-40 ° C to +125 ° C
SOT23-6
Tape & reel
K156
LMV823AIST MiniSO10 K156
LMV825AIPT TSSOP16 LMV825AI