Datasheet

LMV331, LMV393, LMV339 Absolute maximum ratings and operating conditions
Doc ID 16866 Rev 3 3/17
2 Absolute maximum ratings and operating conditions
Table 1. Absolute maximum ratings
Symbol Parameter Value Unit
V
CC
Supply voltage
(1)
1. All voltage values, except the differential voltage, are referenced to V
cc
-.
5.5 V
V
ID
Differential input voltage ± 5.5 V
V
IN
Input voltage range (V
CC
-) - 0.3 to (V
CC
+) + 0.3 V
V
out
Output voltage
(1)
5.5 V
R
thja
Thermal resistance junction to ambient
(2)
SC70-5
SOT23-5
SO-8
MiniSO-8
SO14
TSSOP14
2. Short-circuits can cause excessive heating. These values are typical.
205
250
125
190
105
100
°C/W
R
thjc
Thermal resistance junction to case
(2)
SC70-5
SOT23-5
SO-8
MiniSO-8
SO14
TSSOP14
172
81
40
39
31
32
°C/W
T
stg
Storage temperature -65 to +150 °C
T
j
Junction temperature 150 °C
T
LEAD
Lead temperature (soldering 10 seconds) 260 °C
ESD
Human body model (HBM)
(3)
3. Human body model: a 100 pF capacitor is charged to the specified voltage, then discharged through a
1.5 kΩ resistor between two pins of the device. This is done for all couples of connected pin combinations
while the other pins are floating.
2000
VMachine model (MM)
(4)
4. Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between
two pins of the device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of
connected pin combinations while the other pins are floating.
200
Charged device model (CDM)
(5)
5. Charged device model: all pins and package are charged together to the specified voltage and then
discharged directly to ground through only one pin. This is done for all pins.
1500
Latch-up immunity 200 mA
Table 2. Operating conditions
Symbol Parameter Value Unit
T
oper
Operating temperature range -40 to +85 °C
V
CC
Supply voltage
-40°C < T
amb
< +85°C 2.7 to 5.0
V