Datasheet
DocID11887 Rev 6 3/17
LMV321, LMV358, LMV324 Absolute maximum ratings and operating conditions
17
1 Absolute maximum ratings and operating conditions
Table 1. Absolute maximum ratings
Symbol Parameter Value Unit
V
CC
Supply voltage
(1)
1. All voltage values, except differential voltage are with respect to network terminal.
7
VV
id
Differential input voltage
(2)
2. The differential voltage is the non-inverting input terminal with respect to the inverting input terminal. If
V
id
> ±1 V, the maximum input current must not exceed ±1 mA. In this case (V
id
> ±1 V), an input series
resistor must be added to limit input current.
±1
V
in
Input voltage V
DD
-0.3 to V
CC
+0.3
T
oper
Operating free air temperature range -40 to + 125
°CT
stg
Storage temperature -65 to +150
T
j
Maximum junction temperature 150
R
thja
Thermal resistance junction-to-ambient
(3)
SOT23-5
SO8
TSSOP8
SO14
TSSOP14
3. Short-circuits can cause excessive heating. Destructive dissipation can result from simultaneous short-
circuits on all amplifiers. All values are typical.
250
125
120
103
100
°C/W
R
thjc
Thermal resistance junction-to-case
(3)
SOT23-5
SO8
TSSOP8
SO14
TSSOP14
81
40
37
31
32
ESD
HBM: human body model
(4)
4. Human body model: a 100 pF capacitor is charged to the specified voltage, then discharged through
a 1.5 kW resistor between two pins of the device. This is done for all couples of connected pin
combinations while the other pins are floating.
2kV
MM: machine model
(5)
5. Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between
two pins of the device with no external series resistor (internal resistor < 5 W). This is done for all couples
of connected pin combinations while the other pins are floating.
200 V
CDM: charged device model
(6)
6. Charged device model: all pins and the package are charged together to the specified voltage and then
discharged directly to the ground through only one pin. This is done for all pins.
No value specified for CDM on SOT23-5L package. The value is given for SO and TSSOP packages.
1.5 kV
Lead temperature (soldering, 10 sec.) 250 °C
Output short-circuit duration See
(7)
7. Short-circuits from the output to V
CC
can cause excessive heating. The maximum output current is
approximately 48 mA, independent of the magnitude of V
CC
. Destructive dissipation can result from
simultaneous short-circuits on all amplifiers.