Datasheet

LM2901 Absolute maximum ratings and operating conditions
Doc ID 2468 Rev 7 3/17
2 Absolute maximum ratings and operating conditions
Table 1. Absolute maximum ratings
Symbol Parameter Value Unit
V
CC
Supply voltage ±18 to 36 V
V
id
Differential input voltage ±36 V
V
in
Input voltage -0.3 to +36 V
Output short-circuit to ground
(1)
1. Short-circuits from the output to V
CC
+
can cause excessive heating and eventual destruction. The
maximum output current is approximately 20 mA, independent of the magnitude of V
CC
+
.
R
thja
Thermal resistance junction to ambient
(2)
DIP14
SO-14
TSSOP14
QFN16 3x3
2. Short-circuits can cause excessive heating. Destructive dissipation can result from simultaneous short-
circuits on all amplifiers. All values are typical.
80
105
100
45
°C/W
R
thjc
Thermal resistance junction to case
(2)
DIP14
SO-14
TSSOP14
QFN16 3x3
33
31
32
14
T
j
Maximum junction temperature +150 °C
T
stg
Storage temperature range -65 to +150 °C
ESD
HBM: human body model
(3)
3. Human body model: a 100 pF capacitor is charged to the specified voltage, then discharged through a
1.5 kΩ resistor between two pins of the device. This is done for all couples of connected pin combinations
while the other pins are floating.
500 V
MM: machine model
(4)
4. Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between
two pins of the device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of
connected pin combinations while the other pins are floating.
100 V
CDM: charged device model
(5)
5. Charged device model: all pins and the package are charged together to the specified voltage and then
discharged directly to the ground through only one pin. This is done for all pins.
1500 V
Table 2. Operating conditions
Symbol Parameter Value Unit
V
CC
Supply voltage
2 to 32
±1 to ±16
V
V
icm
Common mode input voltage range
T
min
≤ T
amb
≤ T
max
0 to (V
CC
+
-1.5)
0 to (V
CC
+
-2)
V
T
oper
Operating free-air temperature range -40 to +125 °C