Datasheet

Absolute maximum ratings and operating conditions LM119, LM219, LM319
4/13 DocID2155 Rev 3
2 Absolute maximum ratings and operating conditions
Table 1. Absolute maximum ratings (AMR)
Symbol Parameter Value Unit
V
o
- V
CC
-
Output to negative supply voltage 36
V
V
CC
-
Negative supply voltage -25
V
CC
+
Positive supply voltage 18
V
id
Differential input voltage ±5
V
i
Input voltage
(1)
1. For supply voltages lower than ±15 V the absolute maximum input voltage is equal to the supply voltage.
±15
Output short-circuit to ground Infinite
T
j
Maximum junction temperature 150
°C
T
stg
storage temperature range -65 to +150
R
thja
Thermal resistance junction to ambient
(2)(3)
DIP14
SO-14
2. Short-circuits can cause excessive heating. Destructive dissipation can result from simultaneous short-
circuits on all amplifiers.
3. R
th
are typical values.
80
105
°C/W
R
thjc
Thermal resistance junction to case
(2)(3)
DIP14
SO-14
33
31
ESD
HBM: human body model
(4)
MM: machine model
(5)
CDM: charged device model
(6)
4. Human body model: 100 pF discharged through a 1.5 kΩ resistor between two pins of the device, done for
all couples of pin combinations with other pins floating.
5. Machine model: a 200 pF cap is charged to the specified voltage, then discharged directly between two
pins of the device with no external series resistor (internal resistor < 5 Ω), done for all couples of pin
combinations with other pins floating.
6. Charged device model: all pins and the package are charged together to the specified voltage and then
discharged directly to the ground through only one pin. This is done for all pins.
400
100
1500
V
Table 2. Operating conditions
Symbol Parameter Value Unit
V
CC
Supply voltage 5 to ±15 V
T
oper
Operating free-air temperature range
LM119
LM219
LM319
-55 to + 125
-45 to + 105
0 to + 70
°C