Datasheet

LD49300XX08, LD49300XX10, LD49300XX12 Pin configuration
Doc ID 12861 Rev 3 5/20
3 Pin configuration
Figure 5. Pin connections (top view)
Table 2. Pin description
Pin n° Symbol Note
1
EN Enable (Input): Logic High = Enable, Logic Low = Shutdown.
ADJ Adjustable regulator feedback input. Connect to resistor voltage divider.
2V
IN
Input voltage which supplies current to the output power device.
3 GND Ground (TAB is connected to ground).
4V
OUT
Regulator output.
5V
BIAS
Input bias voltage for powering all circuitry on the regulator with the exception of the output
power device.