Datasheet
Table Of Contents
- 1 Diagram
- 2 Pin configuration
- 3 Maximum ratings
- 4 Schematic application
- 5 Electrical characteristics
- Table 3. Electrical characteristics of LD1117#12
- Table 4. Electrical characteristics of LD1117#18
- Table 5. Electrical characteristics of LD1117#25
- Table 6. Electrical characteristics of LD1117#33
- Table 7. Electrical characteristics of LD1117#50
- Table 8. Electrical characteristics of LD1117 (adjustable)
- Table 9. Electrical characteristics of LD1117#12C
- Table 10. Electrical characteristics of LD1117#18C
- Table 11. Electrical characteristics of LD1117#25C
- Table 12. Electrical characteristics of LD1117#33C
- Table 13. Electrical characteristics of LD1117#50C
- Table 14. Electrical characteristics of LD1117C (adjustable)
- 6 Typical application
- 7 LD1117 adjustable: application note
- 8 Package mechanical data
- Table 15. TO-220 mechanical data (type STD-ST Dual Gauge)
- Figure 12. Drawing dimension TO-220 (type STD-ST Dual Gauge)
- Table 16. TO-220 mechanical data (type STD-ST Single Gauge)
- Figure 13. Drawing dimension TO-220 (type STD-ST Single Gauge)
- Table 17. SOT-223 mechanical data
- Figure 14. Drawing dimension SOT-223
- Table 18. SO-8 mechanical data
- Figure 15. Drawing dimension SO-8
- Table 19. DPAK mechanical data
- Figure 16. Drawing dimension DPAK (type STD-ST)
- Figure 17. Drawing dimension DPAK (type Fujitsu-subcon.)
- Figure 18. Drawing dimension DPAK (type IDS-subcon.)
- Table 20. Footprint data
- Figure 19. DPAK footprint recommended data
- 9 Packaging mechanical data
- Figure 20. Drawing dimension tube for TO-220 Dual Gauge (mm.)
- Figure 21. Drawing dimension tube for TO-220 Single Gauge (mm.)
- Table 21. SOT-223 tape and reel mechanical data
- Figure 22. Tape for SOT-223 (dimensions are in mm)
- Figure 23. Reel for SOT-223 (dimensions are in mm)
- Table 22. SO-8 tape and reel mechanical data
- Figure 24. SO-8 tape and reel dimensions
- Table 23. DPAK tape and reel mechanical data
- Figure 25. DPAK footprint
- Figure 26. Tape for DPAK
- Figure 27. Reel for DPAK
- 10 Order codes
- 11 Revision history

DocID2572 Rev 33 7/44
LD1117 Maximum ratings
3 Maximum ratings
Table 1. Absolute maximum ratings
Symbol Parameter Value Unit
V
IN
(1)
1. Absolute maximum rating of V
IN
= 18 V, when I
OUT
is lower than 20 mA.
DC input voltage 15 V
P
TOT
Power dissipation 12 W
T
STG
Storage temperature range -40 to +150 °C
T
OP
Operating junction temperature range
for C version -40 to +125 °C
for standard version 0 to +125 °C
Table 2. Thermal data
Symbol Parameter SOT-223 SO-8 DPAK TO-220 Unit
R
thJC
Thermal resistance junction-case 15 20 8 5 °C/W
R
thJA
Thermal resistance junction-ambient 110 55 100 50 °C/W