Datasheet
Table Of Contents
- 1 Diagram
- 2 Pin configuration
- 3 Maximum ratings
- 4 Schematic application
- 5 Electrical characteristics
- Table 3. Electrical characteristics of LD1117#12
- Table 4. Electrical characteristics of LD1117#18
- Table 5. Electrical characteristics of LD1117#25
- Table 6. Electrical characteristics of LD1117#33
- Table 7. Electrical characteristics of LD1117#50
- Table 8. Electrical characteristics of LD1117 (adjustable)
- Table 9. Electrical characteristics of LD1117#12C
- Table 10. Electrical characteristics of LD1117#18C
- Table 11. Electrical characteristics of LD1117#25C
- Table 12. Electrical characteristics of LD1117#33C
- Table 13. Electrical characteristics of LD1117#50C
- Table 14. Electrical characteristics of LD1117C (adjustable)
- 6 Typical application
- 7 LD1117 adjustable: application note
- 8 Package mechanical data
- Table 15. TO-220 mechanical data (type STD-ST Dual Gauge)
- Figure 12. Drawing dimension TO-220 (type STD-ST Dual Gauge)
- Table 16. TO-220 mechanical data (type STD-ST Single Gauge)
- Figure 13. Drawing dimension TO-220 (type STD-ST Single Gauge)
- Table 17. SOT-223 mechanical data
- Figure 14. Drawing dimension SOT-223
- Table 18. SO-8 mechanical data
- Figure 15. Drawing dimension SO-8
- Table 19. DPAK mechanical data
- Figure 16. Drawing dimension DPAK (type STD-ST)
- Figure 17. Drawing dimension DPAK (type Fujitsu-subcon.)
- Figure 18. Drawing dimension DPAK (type IDS-subcon.)
- Table 20. Footprint data
- Figure 19. DPAK footprint recommended data
- 9 Packaging mechanical data
- Figure 20. Drawing dimension tube for TO-220 Dual Gauge (mm.)
- Figure 21. Drawing dimension tube for TO-220 Single Gauge (mm.)
- Table 21. SOT-223 tape and reel mechanical data
- Figure 22. Tape for SOT-223 (dimensions are in mm)
- Figure 23. Reel for SOT-223 (dimensions are in mm)
- Table 22. SO-8 tape and reel mechanical data
- Figure 24. SO-8 tape and reel dimensions
- Table 23. DPAK tape and reel mechanical data
- Figure 25. DPAK footprint
- Figure 26. Tape for DPAK
- Figure 27. Reel for DPAK
- 10 Order codes
- 11 Revision history
LD1117
44/44 DocID2572 Rev 33
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
ST PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE
SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B)
AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS
OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT
PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS
EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR “AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRY
DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE
DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2013 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com