Datasheet

L99MC6 Absolute maximum ratings
Doc ID 16523 Rev 2 17/32
3 Absolute maximum ratings
Stressing the device above the rating listed in Table 3 may cause permanent damage to the
device. These are stress ratings only and operation of the device at these or any other
conditions above those indicated in the operating sections of this specification is not implied.
Exposure to absolute maximum rating conditions for extended periods may affect device
reliability. Refer also to the STMicroelectronics™ SURE program and other relevant quality
document.
All maximum ratings are absolute ratings. Leaving the limitation of any of these values may
cause an irreversible damage of the integrated circuit.
Table 3. Absolute maximum ratings
Symbol Parameter Value Unit
V
S
(DRN1 HS
config)
DC supply voltage -0.3 to 28 V
Single pulse t
max
< 400 ms in HS or LS
configuration with R
load min
= 40 Ω
(1)
1. The device requires a minimum load impedance of 40 Ω to sustain a load dump pulse of 40 V according to
the ISO 7637 pulse 5b.
40 V
Single pulse t
max
< 400 ms in bridge mode V
DRN_CL1-6
V
V
CC
Stabilized supply voltage, logic supply -0.3 to 5.5 V
DI, DO, SCK,
CSN, IN
Digital input/output voltage -0.3 to V
CC
+ 0.3 V
DRN 1-6 Output current capability ±1,65 A
SRC 1-3 Output current capability ±1,65 A
GND Current capability 3,30 A
T
j
Operating junction temperature -40 to 150 °C