Datasheet

Electrical specifications L99H01
12/53 DocID15567 Rev 6
2 Electrical specifications
2.1 Absolute maximum ratings
Stressing the device above the rating listed in Table 4 may cause permanent damage to the
device. These are stress ratings only and operation of the device at these or any other
conditions above those indicated in the operating sections of this specification is not implied.
Exposure to absolute maximum rating conditions for extended periods may affect device
reliability.
2.2 ESD protection
Table 4. Absolute maximum ratings
Item Symbol Parameter Value Unit
4.1.1
V
S
Power supply voltage -0,3 to 35 V
4.1.2 Single pulse t
max
< 400 ms 40 V
4.2 V
CC
Stabilished supply voltage -0.3 to 5.5 V
4.3
DI, DO, CLK, CSN,
EN, DIR, PWM
Digital input / output voltage -0.3 to V
CC
+ 0.3 V
4.4 CSO, TS Analog input / output voltage -0.3 to V
CC
+ 0.3 V
4.5
CSI1+, CSI1-,
CSI2+, CSI2-
HV signal pins -4 to V
S
+ 5V V
4.6
GL2, GH2, GL1,
GH1 (Gxy)
HV signal pins
Sxy - 1 to Sxy + 10;
V
CP
+0.3
V
4.7 SL2, SH2, SL1, SH1 HV signal pins -6 to 40 V
4.8 CP2- CP1- HV signal pins -0.3 to V
S
+ 0.3 V
4.9 CP1+ HV signal pins V
S
- 0.3 to V
S
+10 V
4.10 CP2+ HV signal pins V
S
- 0.6 to V
S
+10 V
4.11 CP Power pin V
S
- 0.3 to V
S
+10 V
Table 5. ESD protection
Item Parameter Value Unit
5.1 All pins ± 2
(1)
1. - HBM according to MIL 883C, Method 3015.7 or EIA/JESD22-A114-A.
- HBM with all unzapped pins grounded.
kV
5.2 V
S
versus GND ± 4
(1)
kV