Datasheet

L6924U Maximum ratings
Doc ID 14716 Rev 2 7/37
3 Maximum ratings
Stressing the device above the rating listed in the “absolute maximum ratings” table may
cause permanent damage to the device. These are stress ratings only and operation of the
device at these or any other conditions above those indicated in the operating sections of
this specification is not implied. Exposure to absolute maximum rating conditions for
extended periods may affect device reliability. Refer also to the STMicroelectronics sure
program and other relevant quality documents.
Table 3. Absolute maximum ratings
Symbol Parameter Value Unit
V
IN
Input voltage -0.3 to 16 V
V
INSNS
, SD Input voltage -0.3 to V
IN
V
V
OUT
, V
OSNS
Output voltage -0.3 to 5 V
ISEL, MODE Input voltage -0.3 to 6 V
ST1, ST2 Output voltage -0.3 to V
IN
V
Output current 30 mA
V
REF
, TH, I
END
,
I
AC
, I
USB
, T
PRG
,
GND
-0.3 to 4 V
All pins
Maximum withstanding voltage range test condition:
CDFAEC-Q100-002- “human body model”
acceptance criteria: “normal performance’
± 2 kV
Table 4. Thermal data
Symbol Parameter Value Unit
R
thJA
Thermal resistance junction to ambient
(1)
1. Device mounted on demonstration board
75 °C/W
T
STG
Storage temperature range - 55 to 150 °C
T
J
Junction temperature range - 40 to 125 °C
P
TOT
Power dissipation at T = 70 °C 0.67 W