Datasheet
Table Of Contents
- Figure 1. Block diagram
- 1 Description
- 2 Maximum ratings
- 3 Pin connection
- 4 Electrical characteristics
- 5 Typical electrical performance
- Figure 3. IC consumption vs. VCC
- Figure 4. IC consumption vs. TJ
- Figure 5. VCC Zener voltage vs. TJ
- Figure 6. Startup and UVLO vs. TJ
- Figure 7. Feedback reference vs. TJ
- Figure 8. E/A output clamp levels vs. TJ
- Figure 9. UVLO saturation vs. TJ
- Figure 10. OVP levels vs. TJ
- Figure 11. Inductor saturation threshold vs. TJ
- Figure 12. Vcs clamp vs. TJ
- Figure 13. ZCD sink/source capability vs. TJ
- Figure 14. ZCD clamp level vs. TJ
- Figure 15. R discharge vs. TJ
- Figure 16. Line drop detection threshold vs. TJ
- Figure 17. VMULTpk - VVFF dropout vs. TJ
- Figure 18. PFC_OK threshold vs. TJ
- Figure 19. PFC_OK FFD threshold vs. TJ
- Figure 20. Multiplier characteristics at VFF = 1 V
- Figure 21. Multiplier characteristics at VFF = 3 V
- Figure 22. Multiplier gain vs. TJ
- Figure 23. Gate drive clamp vs. TJ
- Figure 24. Gate drive output saturation vs. TJ
- Figure 25. Delay to output vs. TJ
- Figure 26. Start-up timer period vs. TJ
- 6 Application information
- 7 Application examples and ideas
- Figure 34. Demonstration board EVL6564-100W, wide-range mains: electrical schematic
- Figure 35. L6564 100W TM PFC: compliance to EN61000-3-2 standard
- Figure 36. L6564 100W TM PFC: compliance to JEITA-MITI standard
- Figure 37. L6564 100 W TM PFC: input current waveform at 230 - 50 Hz - 100 W load
- Figure 38. L6564 100W TM PFC: input current waveform at 100 V - 50 Hz - 100 W load
- 8 Package mechanical data
- 9 Order codes
- 10 Revision history
Maximum ratings L6564
6/33 DocID16202 Rev 5
2 Maximum ratings
2.1 Absolute maximum ratings
2.2 Thermal data
Table 1. Absolute maximum ratings
Symbol Pin Parameter Value Unit
V
CC
10 IC supply voltage (I
CC
20 mA) Self-limited V
--- 1, 3, 6 Max. pin voltage (I
pin
1 mA) Self-limited V
--- 2, 4, 5 Analog inputs and outputs -0.3 to 8 V
I
ZCD
7 Zero current detector max. current
-10 (source)
10 (sink)
mA
V
FF
pin 5 Maximum withstanding voltage range
test condition: CDF-AEC-Q100-002
“human body model”
Acceptance criteria: “normal performance”
+/- 1750 V
Other pins
1 to 4
6 to 10
+/- 2000 V
Table 2. Thermal data
Symbol Parameter Value Unit
R
thJA
Max. thermal resistance, junction-to-ambient 120 °C/W
Ptot Power dissipation at T
A
= 50 °C 0.75 W
T
J
Junction temperature operating range -40 to 150 °C
T
stg
Storage temperature -55 to 150 °C