Datasheet

L6226 Pin connections
Doc ID 9452 Rev 4 7/31
23 8 ENA Logic input
Bridge A enable. LOW logic level switches
OFF all Power MOSFETs of bridge A. If not
used, it has to be connected to +5V.
24 9 PROGCLA R Pin
Bridge A overcurrent level programming. A
resistor connected between this pin and
Ground sets the programmable current
limiting value for the bridge A. By
connecting this pin to ground the maximum
current is set.This pin cannot be left non-
connected.
Table 4. Pin description (continued)
Pin n.
Name Type Function
SO24/
PowerDIP24
PowerSO36