Datasheet

L5150GJ Electrical specifications
Doc ID 15540 Rev. 12 7/29
2 Electrical specifications
2.1 Absolute maximum ratings
Stressing the device above the rating listed in the Table 3: Absolute maximum ratings may
cause permanent damage to the device. These are stress ratings only and operation of the
device at these or any other conditions above those indicated in the operating sections of
this specification is not implied. Exposure to absolute maximum rating conditions for
extended periods may affect device reliability.
2.2 Thermal data
Table 3. Absolute maximum ratings
Symbol Parameter Value Unit
V
sdc
DC supply voltage -0.3 to 40 V
I
sdc
Input current Internally limited
V
odc
DC output voltage -0.3 to 6 V
I
odc
DC output current Internally limited
V
od Res
Open drain output voltage R
es
-0.3 to V odc + 0.3 V
I
od Res
Open drain output current R
es
Internally limited
V
Res_ad
j V
Res_adj
voltage -0.3 to V odc + 0.3 V
V
od EWo
Open drain output voltage EW
o
-0.3 to V odc + 0.3 V
I
od EWo
Open drain output current EW
o
Internally limited
V
cr
V
cr
voltage -0.3 to V o + 0.3 V
V
EWi
Early warning input voltage -0.3 to 40 V
V
En
Enable input -0.3 to 40 V
T
j
Junction temperature -40 to 150 °C
V
ESD HBM ESD HBM voltage level (HBM-MIL STD 883C) +/- 2 kV
V
ESD CDM ESD CDM voltage level (CDM- ) +/- 750 V
Table 4. Thermal data
(1)
1. The values quoted are for PCB 77 mm x 86 mm x 1.6 mm, FR4, double copper layer with single heatsink
layer, copper thickness 70 µm, thermal vias, copper area 2 cm
2
.
Symbol Parameter Value Unit
R
thj-case
Thermal resistance junction to case:
PowerSSO-12
20 °K/W
R
thj-amb
Thermal resistance junction to ambient:
PowerSSO-12
52 °K/W