Datasheet

L4995 Revision history
Doc ID 13103 Rev 14 33/35
07-Dec-2007 6
Updated Section 2.2: Thermal data:
– corrected note changing single layer with double layer.
Updated Table 5: General:
– changed I
short
typ. value from 750 to 800 mA
– added I
short
max. value
– changed I
lim
typ. value from 820 to 900 mA
– added I
lim
max. value
– added I
lim
note
– added V
dp
note
– changed I
qn_1
typ. value from 110 to 90 µA
– added I
qn_1
max. value
– added I
qn_50
max. value
– added I
qn_150
max. value
– changed I
qn_250
typ. value from 1.2 to 1 mA
– added I
qn_250
max. value
– changed I
qn_500
typ. value from 2.4 to 2.1 mA
– added I
qn_500
max. value
Updated Table 6: Reset:
– changed V
Rlth
parameter definition from “Reset timing low” to
“Reset delay circuit low threshold”
– changed V
Rhth
parameter definition from “Reset timing high” to
“Reset delay circuit high threshold”
– added T
rd
min. and max. values
Updated Table 7: Watchdog:
– added I
wi
max value
Updated Table 8: Enable:
– changed Pull down current symbol from R
En to
I
En
– changed I
En
typ. value from 2.5 to 10 µA
– added I
En
max. value
Added Section 2.4: Electrical characteristics curves.
Added Section 2.5: Test circuit and waveforms plot.
Added Section 4: Package and PCB thermal data
03-Oct-2008 7
Updated PowerSSO-24 information:
– changed Figure 40: PowerSSO-24 package dimensions
– changed Table 12: PowerSSO-24 mechanical data.
19-Mar-2009 8 Updated Table 4: Thermal data
19-May-2009 9
Updated Table 2: Pins descriptions.
Updated Figure 4: Pins configurations (L4995)
– Changed GND to substrate
Table 13. Document revision history (continued)
Date Revision Changes